Suitable for All Car Electronic Windshield Projector Digital GPS Speedometer HUD Car Speed Projector A1 Head Up Display

Introduction:

This product is for drivers’ safety, at high speeds, especially in high-speed driving at night, in order to avoid the driver to look down their head to watch the instrument, and decrease car accident. HUD is in extremely critical moment reflects its delicate care. HUD can project the important information displayed by the instrument (such as speed) onto the windshield, it can not only to help determine the speed of inexperienced novice to control their speed and avoid many of the speed limit road due to speeding violation. More importantly, it enables the driver instantly read the number in great vision and always make drivers eyes on the road in clear mind.

Note: This head up display speed projector compatible with all cars

Features:

• Brand new & high quality
• Compatible with all cars & trucks in the world
• Easy Setup–Plug & Play- Power through Vehicle Cigarette Outlet Jack, No professional installation is required
• Full Display information: Vehicle speed, real time, over speed alarm, compass, altitude, auto sleeping mode(Above functions are projected on the windshield to remind driver to be safe)
• With smart display function: After vehicle stop for 10s, HUD automatically switch to satellite time status, and when vehicle start, HUD automatically switch to the vehicle speed state.
• Over Speed Warning Setting — Alarm Mute Function. Auto Adjust Brightness, Via Light Sensor & Control circuit in HUD unit, Good for day-time & night-time driving
• The GPS HUD uses GPS to determine the true speed of the vehicle. You can fine tune or adjust speed to your personal preference above the Vehicle Speedometer

Specification:

• Working voltage: DC8-18V
• Working current: 40mA
• sleeping current: 15mA
• Compass precision : ±1 Degree
• Speed range: 0-400KM
• Real time precision: The same as satellite
• Satellite positioning time: Cold start: 30s, hot start: 1s
• HUD size: 99mm*90mm*23mm
• 12V car charger: 1000mA,USB cable: 1m

Installation of HUD:

For HUD:

• Place HUD on the proper position of wind instrument panel, then plug car charger into the cigarette lighter inside, and connect HUD with the USB interface.
• In the instant energized, the LED of the host will be fully lit, and then give out a “tick”, the host back to sleeping mode, while the satellite signal icon starts blinking. Host automatically search the satellite signal status, after a few seconds, the host will search one satellite signal, the clock will be displayed in the host window. Upon receipt of a successful satellite positioning, satellite icon lights off, while the satellite signal strength indicator signal lights size.

For reflection film:

• Please stick the reflection film on the windscreen. Please note: Do not use the reflective film before checking the
  HUD host installation location, to avoid wasting of reflection film.

Package Content:

• 1 x Host Machine of HUD
• 1 x Car charger For HUD
• 1 x Reflecting Film
• 1 x Anti-slip Pad
• 1 x Manual