OHANEE X5 Car HUD OBD II Head Up Display Overspeed Warning System Projector Windshield Auto Electronic Voltage Alarm

X5 3.5 Size Head Up Display Easy Plug Aftermarket OBD2 Car HUD Display

Accessories

1 x HUD

1 x non-slip mat,
1 x English User Manual

1 x OBD2 Cable Line

HUD short for Head Up Display.It displays driving datas on the front windshield such as speed, RPM,water temperature,voltage on the car front window glass;avoiding drivers unsafety because of watching the instrument while driving.Drivers can read the driving information instantly , and can always keep the best state on the way with HUD.

Feature:

1. Universal: work with car produce after 2003 with OBD II connector

2. 3” high definition screen

3. Multi-color design, and projection easy read !

4. Nano-technology screen plate , eliminate reflection , make projection clear & sharper .

5. Full information including speed, engine RPM, cooling water temperature , battery voltage, and Alarm for all these .

6. Auto on/off along with Car start/off , protect car battery . (Manual on/off is also available )

7. Equipped with Auto brightness sensor . (manual adjustment is also available )

HUD screen function :

1. Brightness sensor (pls don’t cover by article)

2.Engine RPM

3.RPM unit (1,000 turn/min )

4.Unit display :Cooling water temperature => ℃ or ℉ , battery voltage =>V, Speed => MPH or KM/H

5.Main display => display number of speed, battery voltage, cooling water temperature.

6.Warning Alarm: Alarm for battery voltage, cooling water temperature alarm, over speed alarm ,RPM alarm, beep sound on/off .

HUD starting

1. OBD2 cable input (connector with vehicle OBD II )

2. Power on/off switch

3.Function setting button (can push up, down , inward )

4.Short push function setting button , showing cooling water temperature , battery voltage , or speed.

5.Beep sound on/off: Push function setting button down for 5 sec, all the Alarm function off, again push it 5 sec, Alarm function on .

HUD installation

1.Make sure your car use OBDII connector (as picture 2 ) , also use OBD II protocol (normally you will find a stick under engine board (as picture 1) showing OBD II certified, if not , call your car sales for information )

2.Connect the OBD II cable (included in package) to your Car OBD II jack.

3.Connector other end of cable (mini USB connector) to HUD device .

Reflection film installation

Please Note: HUD project the display information on the car front windscreen , because the windscreen is double, which will make double image on the windscreen when display.The double image of car will be different.If you can see clear the display information, then there is no need to use the reflection film. If there is a double image, then please use the reflection film.

First, please put the supplied non-slip mats in front of the dashboard, and then put the HUD on it.

Second,please stick the reflection film on the windscreen.

The reflecting film should be pasted right above the host machine and it should be able to reflect the whole display screen.

Methods of pasting the film:

1.Spray some water on the place that the film will be pasted on,and then use a dry towel to clean it;

2. Tear off the back side(marked 1) of reflection film,then paste it to the right place.

3. After you have adjusted the location well, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it.

4. Tear off the front side (marked 2) of the reflection film. If the film cannot display the whole information, please adjust the non-slip mat.

The first use of HUD

Start engine and power on HUD, showing the current vehicle voltage and then enter to search ECU state, if the HUD shows speed, rotating speed, indicating that HUD has been installed successfully. (After 1 minute, or if only display the voltage, please check whether HUD, OBD interface, and OBD data cable are correct connection and plug the OBD cable tightly with vehicle OBD interface and HUD. Open HUD switch, and scan again)

HUD setting

HUD display information is from ECU, because when producing car, there is a difference between vehicle dashboard and ECU , then you can enter the setup mode to fine-tune the HUD display value, in order to achieve exactly the same value as dashboard. We have adjusted HUD according to the general test values at the factory, if you find HUD display information is different from dashboard,then make the following adjustments:

1.Long press the wave button vertically for 5s

Please enter into the setting mode,there are three button for wave button: Up button (turning the button to upside),OK button(pressing the button vertically),Down button (turning the button to downside) , after enter into the setting mode, press the OK button vertically one time, the menu will increase one. Turning the upside button or downside button to increase or decrease the parameter. After finish the adjustment, Long press the wave button vertically for 5s to return to the display interface.

Gift Box

Shipping

1. Fedex/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for batch goods, Airport/ Port receiving for FCL;
3. Customers specifying freight forwarders or negotiable shipping methods.

Test Progress